{"id":454,"date":"2021-01-13T14:24:56","date_gmt":"2021-01-13T06:24:56","guid":{"rendered":"http:\/\/201230ip92c2.adwebcloud.com\/?post_type=product&p=454"},"modified":"2023-12-11T10:18:42","modified_gmt":"2023-12-11T02:18:42","slug":"hgd-electromagnetic-flow-meter-new-modle-sy-ldy","status":"publish","type":"product","link":"https:\/\/www.hginstrument.com\/es\/flow-instrument\/hgd-electromagnetic-flow-meter-new-modle-sy-ldy\/","title":{"rendered":"Caudal\u00edmetro electromagn\u00e9tico HGD ( Nuevo modelo: SY-LDY )"},"content":{"rendered":"
Common used type\u200b of HGD Electromagnetic Flow Meter<\/h5>\n\n\n\n\n
In-line compact type<\/strong>
\nExternal powered<\/strong><\/td>\n		In-line Remote type<\/strong>
\nExternal powered<\/strong><\/td>\n		In-line compact type<\/strong>
\nBattery powered<\/strong><\/td>\n		In-line Remote type<\/strong>
\nBattery powered<\/strong><\/td>\n<\/tr>\n
\"emf<\/td>\n\"emf<\/td>\n\"w803e<\/td>\n\"emf<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Technical data of HGD Electromagnetic Flow Meter<\/h5>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Suitable Diameter<\/td>\nDN10~DN2600 (below DN25 non-standard)<\/td>\n<\/tr>\n
Electrode quantity<\/td>\n3pcs ( a pair of measuring electrode and a ground electrode)<\/td>\n<\/tr>\n
Suitable Fluid<\/td>\nLiquid with conductivity not less than 5 \u03bcs\/cm<\/td>\n<\/tr>\n
Measuring Range<\/td>\n0.5~10m\/s (extendable to 15m\/s)<\/td>\n<\/tr>\n
Upper Limit of Span<\/td>\n0.5~10m\/s. 1~5m\/s recommended<\/td>\n<\/tr>\n
Precisi\u00f3n<\/td>\n0.5%, 1.0% of F.S.<\/td>\n<\/tr>\n
Repeatability<\/td>\nBetter than 0.25%<\/td>\n<\/tr>\n
Display of Converter<\/td>\nDisplay : Flow rate ( 4-digits), Totalizer (9-digits), Velocity, Alarm status by LCD ( LED-option)<\/td>\n<\/tr>\n
Flow unit: L\/h, L\/m, L\/s, m3\/h, m3\/min, m3\/s,
\nUSG\/h, USG\/min,USG\/s ( USG is us Gallon on request )<\/td>\n<\/tr>\n
Flow direction : selectable by program<\/td>\n<\/tr>\n
3 Digits display below of decimal points.<\/td>\n<\/tr>\n
K-factor: 5 digits.<\/td>\n<\/tr>\n
Programming language: English, Chinese<\/td>\n<\/tr>\n
Structure option: Compact type; Remote Type<\/td>\n<\/tr>\n
Power supply option<\/td>\n85 ~ 250VAC \/ 50 or 60Hz; 20 ~ 36VDC,\u00a0 Battery power: 3.6V lithium battery<\/td>\n<\/tr>\n
Output Signal<\/td>\n4~20m ADC, load \u2264 750ohm,
\n0~3kHz, 5V with source and changeable width.High terminal and effective frequency output
\nVoltage output:0-5 V DC<\/td>\n<\/tr>\n
Conduit connection<\/td>\nThread M20 * 1.5<\/td>\n<\/tr>\n
Communication option<\/td>\nRS-485; HART<\/td>\n<\/tr>\n
Operation Pressure<\/td>\n1.0MPa, 1.6MPa, 4.0MPa, 16MPa (Special)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\nDepends on liner material<\/td>\n<\/tr>\n
Ambient Temperature<\/td>\nSensor -40\u00b0C ~80\u00b0C. transducer -10\u00b0C ~50\u00b0C<\/td>\n<\/tr>\n
Ambient Humidity<\/td>\n\u2264 85%RH (at 20 \u2103)<\/td>\n<\/tr>\n
Power Consumption<\/td>\n\u2264 8W<\/td>\n<\/tr>\n
Wheather-proof<\/td>\nCompact type: IP65. Remote type: sensor IP68, transducer IP65.<\/td>\n<\/tr>\n
Electrode material option<\/td>\n316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum<\/td>\n<\/tr>\n
Liner material option<\/td>\nPTFE, Soft rubber, Hard rubber, F46, FS, PUR.<\/td>\n<\/tr>\n
Meter tube material option<\/td>\nCarbon steel, SS304<\/td>\n<\/tr>\n
Connection type<\/td>\nFlange connection, Tri-clamp<\/td>\n<\/tr>\n
Flange standard option<\/td>\nGB9119-88 (DIN2051, BS4504), JIS, ANSI<\/td>\n<\/tr>\n
A prueba de explosiones<\/td>\nExd mb IICT6 Gb<\/td>\n<\/tr>\n
Certificate<\/td>\nISO9001:2015, ISO14001:2015, SIL 3, OHSAS18001:2007<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/h5>\n

 <\/p>\n

Dimension for DN15~DN150 Compact type HGD Electromagnetic Flow Meter<\/h5>\n

\"drawing<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
DN<\/td>\nL<\/td>\nH<\/td>\nEstimated weight (Kg)<\/td>\n<\/tr>\n
Integral meter<\/td>\nSensor<\/td>\n<\/tr>\n
15<\/td>\n200<\/td>\n220<\/td>\n10<\/td>\n7<\/td>\n<\/tr>\n
20<\/td>\n200<\/td>\n220<\/td>\n12<\/td>\n9<\/td>\n<\/tr>\n
25<\/td>\n200<\/td>\n230<\/td>\n14<\/td>\n11<\/td>\n<\/tr>\n
32<\/td>\n200<\/td>\n235<\/td>\n15<\/td>\n12<\/td>\n<\/tr>\n
40<\/td>\n200<\/td>\n245<\/td>\n16<\/td>\n13<\/td>\n<\/tr>\n
50<\/td>\n200<\/td>\n250<\/td>\n17<\/td>\n14<\/td>\n<\/tr>\n
65<\/td>\n200<\/td>\n270<\/td>\n25<\/td>\n22<\/td>\n<\/tr>\n
80<\/td>\n200<\/td>\n285<\/td>\n29<\/td>\n26<\/td>\n<\/tr>\n
100<\/td>\n250<\/td>\n300<\/td>\n31<\/td>\n28<\/td>\n<\/tr>\n
125<\/td>\n250<\/td>\n330<\/td>\n35<\/td>\n32<\/td>\n<\/tr>\n
150<\/td>\n300<\/td>\n360<\/td>\n41<\/td>\n38<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Wiring Terminal instruction of\u00a0 HGD Electromagnetic Flow Meter’s remote converter as follow table:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Wiring Terminal<\/strong><\/td>\nDescripci\u00f3n<\/strong><\/td>\nRemark<\/strong><\/td>\n<\/tr>\n
SIG1<\/td>\nSignal l<\/td>\nFor transducer of remote type<\/td>\n<\/tr>\n
SGND<\/td>\nSignal Ground<\/td>\n<\/tr>\n
SIG2<\/td>\nSignal 2<\/td>\n<\/tr>\n
DS1<\/td>\nShielded Exciting\u00a0 1<\/td>\n<\/tr>\n
DS2<\/td>\nShielded Exciting\u00a0 2<\/td>\n<\/tr>\n
EXT +<\/td>\nExciting Current “+”<\/td>\n<\/tr>\n
EXT –<\/td>\nExciting Current “-“<\/td>\n<\/tr>\n
VDIN<\/td>\n24VDC Connect point (for 2-wire current output)<\/td>\nUse for wiring of analog Current Output<\/td>\n<\/tr>\n
IOUT<\/td>\nAnalog Current Output<\/td>\n<\/tr>\n
ICOM<\/td>\nAnalog Current Output Ground<\/td>\n<\/tr>\n
POUT<\/td>\nFlow Frequency (Pulse) Output<\/td>\nUse for wiring of frequency (pulse) Output<\/td>\n<\/tr>\n
PCOM<\/td>\nFrequency (Pulse) Output Ground<\/td>\n<\/tr>\n
ALMH<\/td>\nUpper Limit Alarm Output<\/td>\nUse for wiring of alarm Output<\/td>\n<\/tr>\n
ALML<\/td>\nLower Limit Alarm Output<\/td>\n<\/tr>\n
ACOM<\/td>\nAlarm Output Ground<\/td>\n<\/tr>\n
TRX+<\/td>\nCommunication terminal (RS485 A+)<\/td>\nUse for wiring of communication<\/td>\n<\/tr>\n
TRX-<\/td>\nCommunication terminal (RS485 B-)<\/td>\n<\/tr>\n
TCOM<\/td>\nRS232 Communication Ground<\/td>\n<\/tr>\n
L<\/td>\nConnect 220VAC \/ 24VDC +<\/td>\n<\/td>\n<\/tr>\n
N<\/td>\nConnect 220VAC \/ 24VDC –<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Wiring Terminal instruction of\u00a0 HGD Electromagnetic Flow Meter’s compact converter as follow table:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Wiring Terminal<\/strong><\/td>\nDescripci\u00f3n<\/strong><\/td>\nRemark<\/strong><\/td>\n<\/tr>\n
L 2<\/td>\nConnect 220VAC \/ 24VDC –<\/td>\n<\/td>\n<\/tr>\n
L 1<\/td>\nConnect 220VAC \/ 24VDC +<\/td>\n<\/td>\n<\/tr>\n
COM<\/td>\nCurrent Output Ground for Flow Measurement<\/td>\nUse for wiring of analog Current Output<\/td>\n<\/tr>\n
I +<\/td>\nCurrent Output for Flow Measurement<\/td>\n<\/tr>\n
COM<\/td>\nFrequency \/ Pulse Output Ground<\/td>\nUse for wiring of frequency \/ pulse Output<\/td>\n<\/tr>\n
P+<\/td>\nFrequency \/ Pulse Output for Bi-directional Flow<\/td>\n<\/tr>\n
AH<\/td>\nAlarm Output for Upper Limit<\/td>\nUse for wiring of alarm Output<\/td>\n<\/tr>\n
AL<\/td>\nAlarm Output for Lower Limit<\/td>\n<\/tr>\n
COM<\/td>\nAlarm Output Ground (connect with Current Output Ground or Frequency \/ Pulse Output Ground )<\/td>\n<\/tr>\n
FUSE<\/td>\nFuse for Power Supply<\/td>\n<\/td>\n<\/tr>\n
T +<\/td>\nCommunication terminal (RS485 A+)<\/td>\nUse for wiring of communication<\/td>\n<\/tr>\n
G<\/td>\nRS232 Communication Ground<\/td>\n<\/tr>\n
T –<\/td>\nCommunication terminal (RS485 B-)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

HGD Electromagnetic Flow Meter’s converter has 54 parameters totally,\u00a0 user can operate buttons to set parameters, HGD Electromagnetic Flow Meter’s parameter list is shown as following table:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Art\u00edculo<\/td>\nParameter words<\/td>\nFunction description<\/td>\nSetting way<\/td>\nGama<\/td>\nPassword Grade<\/td>\n<\/tr>\n
1<\/td>\nLanguage<\/td>\nDisplay language<\/td>\nSelect<\/td>\nChinese \/ English<\/td>\n2<\/td>\n<\/tr>\n
2<\/td>\nComm Addres<\/td>\nInstrument Communication Address<\/td>\nSetting Value<\/td>\n0 ~ 99<\/td>\n2<\/td>\n<\/tr>\n
3<\/td>\nBaud Rate<\/td>\nInstrument Communication Speed<\/td>\nSelect<\/td>\n300 ~ 38400<\/td>\n2<\/td>\n<\/tr>\n
4<\/td>\nSnsr Size<\/td>\nPipe line Size<\/td>\nSelect<\/td>\n3 ~ 3000<\/td>\n2<\/td>\n<\/tr>\n
5<\/td>\nFlow Unit<\/td>\nMeasuring Unit<\/td>\nSelect<\/td>\nL\/h, L\/m, L\/s, m3<\/sup>\/h\u00a0 m3<\/sup>\/min,m3<\/sup>\/s<\/td>\n2<\/td>\n<\/tr>\n
6<\/td>\nFlow Range<\/td>\nMeasure range Setting<\/td>\nSetting Value<\/td>\n0 ~ 99999<\/td>\n2<\/td>\n<\/tr>\n
7<\/td>\nFlow Rspns<\/td>\nMeasure Damping Time<\/td>\nSelect<\/td>\n1 ~ 50<\/td>\n2<\/td>\n<\/tr>\n
8<\/td>\nFlow Direct<\/td>\nMeasuring Direction Selection<\/td>\nSelect<\/td>\nForward \/ Reverse<\/td>\n2<\/td>\n<\/tr>\n
9<\/td>\nFlow Zero<\/td>\nFlow Zero Amendment<\/td>\nSetting Value<\/td>\n0 ~ \u00b19999<\/td>\n2<\/td>\n<\/tr>\n
10<\/td>\nFlow Cutoff<\/td>\nSmall Signal Resection Point<\/td>\nSetting Value<\/td>\n0 ~ 599.99%<\/td>\n2<\/td>\n<\/tr>\n
11<\/td>\nCutoff Ena<\/td>\nResection Point Indication<\/p>\n

Permission<\/td>\n

Select<\/td>\nPermit \uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
12<\/td>\nTotal Unit<\/td>\nFlow Totalize Unit<\/td>\nSelect<\/td>\n0.001m3 ~ 1 m3<\/p>\n

0.001 L ~ 1 L<\/td>\n

2<\/td>\n<\/tr>\n
13<\/td>\nSegmaN Ena<\/td>\nReverse Output Permission<\/td>\nSelect<\/td>\nPermit \uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
14<\/td>\nAnalog Type<\/td>\nCurrent Output Type<\/td>\nSelect<\/td>\n0 ~ 10 mA \/ 4 ~ 20mA<\/td>\n2<\/td>\n<\/tr>\n
15<\/td>\nPulse Type<\/td>\nPulse Output Mode<\/td>\nSelect<\/td>\nFrequency\uff0fPulse<\/td>\n2<\/td>\n<\/tr>\n
16<\/td>\nPulse Fact<\/td>\nPulse<\/p>\n

Unit equivalent<\/td>\n

Select<\/td>\n0.001m3 ~ 1 m3<\/p>\n

0.001 L ~ 1 L<\/td>\n

2<\/td>\n<\/tr>\n
17<\/td>\nFreque Max<\/td>\nFrequency Output Range<\/td>\nSelect<\/td>\n1 ~ 5999 Hz<\/td>\n2<\/td>\n<\/tr>\n
18<\/td>\nMtsnsr Ena<\/td>\nEmpty pipe Alarm Permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
19<\/td>\nMtsnsr Trip<\/td>\nEmpty pipe Alarm Threshold<\/td>\nSetting Value<\/td>\n59999%<\/td>\n2<\/td>\n<\/tr>\n
20<\/td>\nAlm Hi Ena<\/td>\nUpper Limit Alarm Permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
21<\/td>\nAlm Hi Val<\/td>\nUpper Limit Alarm Value<\/td>\nSetting Value<\/td>\n000.0 ~ 599.99%<\/td>\n2<\/td>\n<\/tr>\n
22<\/td>\nAlm Lo Ena<\/td>\nLower Limit Alarm Permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
23<\/td>\nAlm Lo Val<\/td>\nLower Limit Alarm Value<\/td>\nSetting Value<\/td>\n000.0 ~ 599.99%<\/td>\n2<\/td>\n<\/tr>\n
24<\/td>\nSys Alm Ena<\/td>\nExcitation Alarm Permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n2<\/td>\n<\/tr>\n
25<\/td>\nClr Sum Key<\/td>\nTotal Flow Zero Password<\/td>\nSetting Value<\/td>\n0 ~ 99999<\/td>\n3<\/td>\n<\/tr>\n
26<\/td>\nSnsr Code1<\/td>\nSensor Code 1<\/td>\nUser Setting<\/td>\nFactory Year Month (0 ~ 99999)<\/td>\n4<\/td>\n<\/tr>\n
27<\/td>\nSnsr Code2<\/td>\nSensor Code 2<\/td>\nUser Setting<\/td>\nProduct Serial No ( 0 ~ 99999)<\/td>\n4<\/td>\n<\/tr>\n
28<\/td>\nField Type<\/td>\nExciting frequency type<\/td>\nSelect<\/td>\nType 1, 2, 3<\/td>\n4<\/td>\n<\/tr>\n
29<\/td>\nSensor Fact<\/td>\nSensor Factor Value<\/td>\nSetting Value<\/td>\n0.0000 ~ 5.9999<\/td>\n4<\/td>\n<\/tr>\n
30<\/td>\nTotal Point<\/td>\nBatch control volume set<\/td>\nSetting Value<\/td>\n00000\uff5e59999<\/td>\n4<\/td>\n<\/tr>\n
31<\/td>\nLine CRC Ena<\/td>\nFlow amend permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n5<\/td>\n<\/tr>\n
32<\/td>\nLineary CRC1<\/td>\nFlow amend point 1<\/td>\nUser Setting<\/td>\nsetting according to the velocity<\/td>\n5<\/td>\n<\/tr>\n
33<\/td>\nLineary Fact 1<\/td>\nFlow amend value 1<\/td>\nUser Setting<\/td>\n0.0000\uff5e1.9999<\/td>\n5<\/td>\n<\/tr>\n
34<\/td>\nLineary CRC2<\/td>\nFlow amend point 2<\/td>\nUser Setting<\/td>\nsetting according to the velocity<\/td>\n5<\/td>\n<\/tr>\n
35<\/td>\nLineary Fact 2<\/td>\nFlow amend value 2<\/td>\nUser Setting<\/td>\n0.0000\uff5e1.9999<\/td>\n5<\/td>\n<\/tr>\n
36<\/td>\nLineary CRC3<\/td>\nFlow amend point 3<\/td>\nUser Setting<\/td>\nsetting according to the velocity<\/td>\n5<\/td>\n<\/tr>\n
37<\/td>\nLineary Fact 3<\/td>\nFlow amend value 3<\/td>\nUser Setting<\/td>\n0.0000\uff5e1.9999<\/td>\n5<\/td>\n<\/tr>\n
38<\/td>\nLineary CRC4<\/td>\nFlow amend point 4<\/td>\nUser Setting<\/td>\nsetting according to the velocity<\/td>\n5<\/td>\n<\/tr>\n
39<\/td>\nLineary Fact4<\/td>\nFlow amend value 4<\/td>\nUser Setting<\/td>\n0.0000\uff5e1.9999<\/td>\n5<\/td>\n<\/tr>\n
40<\/td>\nFwdTotal Lo<\/td>\nForward Total Flow Low Level<\/td>\nRevisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
41<\/td>\nFwdTotal Hi<\/td>\nForward Total Flow High Level<\/td>\nRevisable<\/td>\n0000 ~ 9999<\/td>\n5<\/td>\n<\/tr>\n
42<\/td>\nRevTotal Lo<\/td>\nReverse Total Flow Low Level<\/td>\nRevisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
43<\/td>\nRevTotal Hi<\/td>\nReverse Total Flow High Level<\/td>\nRevisable<\/td>\n0000 ~ 9999<\/td>\n5<\/td>\n<\/tr>\n
44<\/td>\nPlsntLmtEna<\/td>\nPeak Restriction Permission<\/td>\nSelect<\/td>\nPermit\uff0fProhibit<\/td>\n5<\/td>\n<\/tr>\n
45<\/td>\nPlsntLmtVal<\/td>\nPeak Restriction Factor<\/td>\nSelect<\/td>\n0.010 ~ 0.800 m\/s<\/td>\n5<\/td>\n<\/tr>\n
46<\/td>\nPlsnt Delay<\/td>\nPeak Restriction Time<\/td>\nSelect<\/td>\n400 ~ 2500 ms<\/td>\n5<\/td>\n<\/tr>\n
47<\/td>\nPass Word 1<\/td>\nPassword grade 1<\/td>\nUse Revisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
48<\/td>\nPass Word 2<\/td>\nPassword grade 2<\/td>\nUse Revisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
49<\/td>\nPass Word 3<\/td>\nPassword grade 3<\/td>\nUse Revisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
50<\/td>\nPass Word 4<\/td>\nPassword grade 4<\/td>\nUse Revisable<\/td>\n00000 ~ 99999<\/td>\n5<\/td>\n<\/tr>\n
51<\/td>\nAnalog Zero<\/td>\nCurrent Zero Amendment<\/td>\nSetting Value<\/td>\n0.0000 ~ 1.9999<\/td>\n5<\/td>\n<\/tr>\n
52<\/td>\nAnlg Range<\/td>\nCurrent Full Span Amendment<\/td>\nSetting Value<\/td>\n0.0000 ~ 3.9999<\/td>\n5<\/td>\n<\/tr>\n
53<\/td>\nMeter Fact<\/td>\nCalibration Factor<\/td>\nSetting Value<\/td>\n0.0000 ~ 5.9999<\/td>\n5<\/td>\n<\/tr>\n
54<\/td>\nMeterCode 1<\/td>\nInstrument Code 1<\/td>\nFactory Setting<\/td>\nFactory Year Month (0 ~ 99999)<\/td>\n6<\/td>\n<\/tr>\n
55<\/td>\nMeterCode 2<\/td>\nInstrument Code 2<\/td>\nFactory Setting<\/td>\nProduct Serial No. (0~99999)<\/td>\n6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

Workshop Assembly line<\/h5>\n
\u00a0 \u00a0\"workshop<\/h5>\n
<\/h5>\n

 <\/p>\n

Workshop Calibration line<\/h5>\n

\"\"<\/p>\n

 <\/p>\n

Warehouse<\/h5>\n

\"warehouse\"<\/p>\n

 <\/p>\n

Filed application of HGD Electromagnetic Flow Meter<\/h5>\n

Drink water flow measurement\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0Waste water flow measurement\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 Slurry flow measurement<\/p>\n

\"field<\/p>\n

Electromagnetic Flow Meter–An Ultimate FAQ Guide:<\/strong><\/p>\n

1. What is an Electromagnetic Flow Meter?
\nAn Electromagnetic Flow Meter (EMF) is a type of flow meter that measures the velocity of conductive fluids through a pipe by using a magnetic field.<\/p>\n

2. How does an Electromagnetic Flow Meter work?
\nAn Electromagnetic Flow Meter works by applying a magnetic field perpendicular to the direction of fluid flow. As the conductive fluid passes through the magnetic field, a voltage is generated which is proportional to the flow velocity.<\/p>\n

3. What types of fluids can an Electromagnetic Flow Meter measure?
\nElectromagnetic Flow Meters can measure the flow rate of conductive fluids, such as water, chemicals, sewage, and slurries.<\/p>\n

4. Is an Electromagnetic Flow Meter accurate?
\nYes, Electromagnetic Flow Meters are highly accurate and can achieve a measurement accuracy of +\/- 0.5%.<\/p>\n

5. What is the measuring range of an Electromagnetic Flow Meter?
\nThe measuring range of an Electromagnetic Flow Meter varies depending on the size and type of the meter, but it can range from 0.01 m\/s to 10 m\/s.<\/p>\n

6. Can an Electromagnetic Flow Meter be used for both liquid and gas flow measurement?
\nNo, Electromagnetic Flow Meters can only be used for measuring the flow of conductive liquids.<\/p>\n

7. Can an Electromagnetic Flow Meter be installed in any orientation?
\nNo, Electromagnetic Flow Meters must be installed horizontally with the flow direction being a straight line to achieve accurate measurements.<\/p>\n

8. Do Electromagnetic Flow Meters require regular calibration?
\nYes, it is recommended to calibrate an Electromagnetic Flow Meter annually to ensure accuracy.<\/p>\n

9. Can an Electromagnetic Flow Meter withstand high temperatures and pressures?
\nYes, most Electromagnetic Flow Meters can operate at temperatures up to 200\u00b0C and pressures up to 16 bar.<\/p>\n

10. What is the lifespan of an Electromagnetic Flow Meter?
\nThe lifespan of an Electromagnetic Flow Meter can vary depending on usage and maintenance, but they can typically last for more than 10 years.<\/p>\n

11. Are there any special installation requirements for an Electromagnetic Flow Meter?
\nYes, it is important to have a straight pipe section both upstream and downstream of the Flow Meter to ensure accurate readings.<\/p>\n

12. Can an Electromagnetic Flow Meter be used for measuring pulsating flow?
\nYes, some Electromagnetic Flow Meters have the capability to measure pulsating flow, but it is important to check the specifications of the meter.<\/p>\n

13. What are the advantages of an Electromagnetic Flow Meter compared to other flow meters?
\nSome advantages of an Electromagnetic Flow Meter include its accuracy, non-intrusive installation, and low maintenance requirements.<\/p>\n

14. Is it possible to have multiple outputs with an Electromagnetic Flow Meter?
\nYes, most Electromagnetic Flow Meters have the capability to provide multiple outputs, including 4-20 mA, 0-10 V, and digital communication options.<\/p>\n

15. Can an Electromagnetic Flow Meter be used in hazardous environments?
\nYes, there are options for explosion-proof and intrinsically safe Electromagnetic Flow Meters that can be used in hazardous environments. However, it is important to check the specifications and certifications of the meter.<\/p>","protected":false},"excerpt":{"rendered":"

Caudal\u00edmetro electromagn\u00e9tico HGD<\/a><\/span> is mainly used to measure the volume flow of water, waste water, sewage, beverage, pulp, slurry, the fluid temperature usually not more than 120\u2103, fluid’s conductivity not less than 5\u03bcS\/cm. HGD Electromagnetic Flow Meter’s standard configuration has grounding electode. HGD Electromagnetic Flow Meter’s option communication: RS485, HART, Profibus DP, profibus PA.<\/p>\n

HGD Electromagnetic Flow Meter is widely used in oil and gas field water injection, sewage treatment, paper making, municipal water supply and drainage.
\nHot Tags:<\/strong> Acerca del Grupo Suyi<\/span><\/a>\uff0cInstrumento de flujo<\/a><\/span>\uff0cTransmisor de nivel<\/a><\/span>\uff0ccaudal\u00edmetro de agua<\/a><\/span><\/p>","protected":false},"featured_media":1435,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_cat":[104,75],"product_tag":[2361],"acf":[],"_links":{"self":[{"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/product\/454"}],"collection":[{"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/comments?post=454"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/media\/1435"}],"wp:attachment":[{"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/media?parent=454"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/product_cat?post=454"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.hginstrument.com\/es\/wp-json\/wp\/v2\/product_tag?post=454"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}