HLS-W311 Misuratore d'acqua a ultrasuoni (alimentato a batteria)

HLS-W311 Ultrasonic water meters are widely used in the industry of urban water supply, water resource management, agricultural irrigation, garden management.

Descrizione del prodotto

Features

● Ultra-low power consumption, stable property
● Range ratio: R 200 ,   Size: DN15 ~ DN40
● Built-in lithium battery, applicable for the situation that power supply  is not available.
● External power supply of 8- 36 V DC can be connected to support analog current output or communication.
● Weatherproof: IP68, after using glue sealing the wiring joints, the flow meter can be immersed in the water for long term to work, but the immersive depth shall not exceed 2 m.
● Capacitive sensing operation button ( not open the transmitter cover to operate buttons)

 

Display

 

hls w31 display

Dati tecnici
Executive standard ISO 4064-2005, GB/T 778-2007, JJG 162-2009
Fluido Water, waste water, sea water (meter tube must be fully filled with fluid)
Temperatura di esercizio 0.1 ~ 30℃ (for cold water),   0.1 ~ 100 ℃ ( for hot water)
Pressione di esercizio 1.0 Mpa, 1.6 Mpa
Condizioni ambientali Temperature: -10 ~ 45℃;  Humidity: ≤100% RH
Sensitivity level of upstream flow field U3
Sensitivity level of downstream flow field D0
Electromagnetic compatibility level E2
Meter tube Material Brass
Segnale di uscita One-way 4-20mA, Two-way OCT or TTL (optional),
Comunicazione RS485 (optional)
Weather-proof IP68, after using glue sealing the wiring joints, the flow meter can be immersed in the water for long term to work, but the immersive depth shall not exceed 2 m.
Local display Double line, one line (4-digits) display instant flow rate, another line(9 digits) display accumulative flow.
Memory EEPROM / FLASH storage
Measuring cycle 1 time / second
Alimentazione Built-in 3.6V 19AH Lithium battery (Standard configuration)
External power supply DC 8 – 36 V (for 4-20mA output or communication)
Power dissipation In case of no output, the Built-in Lithium battery can support flow meter continuously working for about 6 years.

 

Flow rate range
Dimensione Range ratio
(R)
Flow rate ( m3/h )
Startup flow Minimum flow (Q1) Transitional flow (Q2) Permanent flow (Q3) Overload Flow (Q4)

DN15

200 0.003 0.0125 0.020 2.500 3.125

DN20

200 0.0035 0.016 0.026 3.200 4.000

DN25

200 0.007 0.020 0.032 4.000

5.000

DN32 200 0.010 0.032 0.050 6.300

7.875

DN40 200 0.015 0.100 0.160 20.000

25.000

 

Error curve

hls w31 error

 

Dimension ( Unit: mm

hls w311 dimension

Dimensione Appearance dimension Connessione alla filettatura Effective
Il filo
length
Pressure
Rating
(Mpa)
L H1 H2 W1 W2

DN15

165 14 129.5 58.5 64.5 G 3/4B 12 1.6

DN20

190 17.5 131.5 58.5 64.5 G 1B 13 1.6

DN25

160 22 134 58.5 64.5 G 1-1/4B 13

1.6

DN32 180 25 136.5 58.5 64.5 G 1-1/2B 14.5

1.6

DN40 200 33 141 58.5 64.5 G 2B 16

1.6

 

 

FAQ

Arisposta : Inviate la vostra domanda o richiesta al nostro indirizzo e-mail: sales@hginstrument.com, inoltreremo le domande all'ingegnere di riferimento.

Arisposta : Per favore comunicare con le vendite la procedura di restituzione prima di restituire il prodotto.

Arisposta : I tempi di consegna dipendono dalla quantità ordinata e dalle specifiche del prodotto. Se le specifiche del prodotto sono convenzionale (non speciale),  I tempi di consegna sono di 5 o 7 giorni lavorativi per quantità d'ordine ≤ 10 pezzi;  I tempi di consegna sono di 2 o 3 settimane lavorative per quantità d'ordine 15 ~ 30 pezzi. 

Arisposta Per corriere, via mare o per via aerea

Arisposta : Sì, in genere la garanzia è di un anno.

Arisposta : Dal 2015 al 2021, il fatturato medio annuo è di 350 milioni di RMB (circa 54,7 milioni di USD).