Rod type Multi-point float level switch
Rod type float level switch is widely used to control the level of liquids such as water, waste water, acid solution, alkaline solution and diesel.
A sealed stainless steel tube (non magnetic conductivity) passes through one or more of the ring magnet floating ball. There are some single contact dry reed switches in the stainless steel tube, and reed switches are distributed on the position of alarm point. The liquid level rising or dropping will drive floating ball to move at the same time. When the float magnet reaches the location of alarm point, reed switch will act and output switch signal.预览更改 （在新窗口中打开）
● Contact rate: 10W, 30W, 50W
● Switch current: 0.5A
● Switch voltage: 220VAC/24VDC
● Insulation resistance
● Switch life span: 10^6 times
● Working pressure: 1.0~3.0MPa
● Working temperature: SUS: -20~200℃ PP:-10~80℃
● Medium S.G.: > 0.55
● Wetted material: SUS304/SUS316/PP/PE/PTFE
● Float dimension depending on medium’s density
● Installation: Top mounting
Answer : Please send your question or enquiry to our email: firstname.lastname@example.org, we will forward the questions to the related engineer.
Answer : Please communicate with the sales about the return procedure before returning product.
Answer : The delivery time depends on the order quantity and product specification. If the product’s specification is conventional ( not special ), delivery time is 5 or 7 working days for order quantity ≤ 10 pieces; delivery time is 2 or 3 working weeks for order quantity 15 ~ 30 pieces.
Answer : by Courier, by Sea or by Air
Answer : Yes, Generally warranty is one year.
Answer : From year 2015 to year 2021, average annual sales is RMB 350 million ( about USD 54.7 million )