Sakelar level non-invasif ultrasonik (untuk wadah tertutup)

Prinsip kerja

The liquid level sensor couples high-frequency ultrasonic pulses to the container wall, the pulses penetrate container wall to propagate in the liquid, and are reflected by the inner surface of the container, detect and calculate the characteristics of the reflected signal, and transmit the measured data to the on-site secondary instrument in real time through the RS485 interface, it can be judged whether the liquid level has reached the position where the level sensor is installed.

Product features

Application conditions

• Media yang berlaku: Pure liquid, emulsion liquid, suspension liquid, etc. Measurable medium list as follow:

C3,  Acetone, Propylene, Oxalic acid, Diesel, Nitromethylaniline, Butadiene, xylene, sulfuric acid, vinyl chloride, kerosene, unsymmetrical dimethyl hydrazine, gasoline, light hydrocarbons, light oil, caustic soda solution, liquid ammonia, Liquefied carbon dioxide, liquefied gas, liquid chlorine, Ethanol, ether, vinyl, crude oil, ethylene oxide, methylamine,Toluene, methanol, Methyl tert-butyl ether, dimethyl ether, Phenol water, Freon, Banana water, Nitric acid, Bromine, salt brine, hydrochloric acid, edible oil, Tetrachloroethylene, Anhydrous hydrogen fluoride, vegetable oil.

• Bahan wadah: baja karbon, baja tahan karat, berbagai logam keras, plastik yang diperkuat serat kaca, resin epoksi, plastik keras, keramik, kaca, karet keras, atau material komposit lainnya.

• Measurable wall thickness of tank: 2 ~ 70 mm.
• Bentuk tangki yang berlaku: Tangki horizontal, tangki bulat, tangki palung, tangki vertikal, dll.

Dimension of level controller SYCW102-LC1

Dimension of level controller SYCW102-LC2

Dimension of double probe

Dimension of Single probe

Technical specification

Installation diagram for SYCW102-LC1   ( Spherical tank, Double probe, one alarm point )

Installation attentions for SYCW102-LC1:

1）on the tank body, the area which the probe contacts shall be polished to smooth and no rust. When installing the suction cup, the wave-emission face of the probe must be coated with silicone grease.
2) The ultrasonic probe and cable assembly (including item 3, 4, 5, and 6) have been assembled before leaving factory. Items 2 and 7 need to be provided by the user.
3) On the vertical tank, the high-level alarm ultrasonic probe is recommended to be installed near the spiral ladder for easy installation and maintenance. The ultrasonic probe signal line is inserted into the galvanized pipe and then connected to the controller along the spiral ladder.
4）After the wiring is completed, the explosion-proof packing culvert at the instrument’s cable entry must be sealed with the configured explosion-proof cement.
5）Explosion-proof flexible pipes are respectively connected to the cable entry of the controller. After installation, the controller shall be higher than the horizontal galvanized pipes on its both sides.
6）The connection specifications of the explosion-proof flexible pipe and the galvanized pipe shall be consistent with the actual selection requirements (cable entry is reserved on the instrument), and the joints between the pipe fitting and the instrument must be done treatment of waterproof and explosion-proof.

Installation diagram for SYCW102-LC2 ( Horizontal tank, single probe, one alarm point )

Installation attentions for SYCW102-LC2:

1) The digital ultrasonic probe provides adapter specification, adapter need to be equipped by the customer, When wiring, remove the adapter first, then re-install and tighten it after threading.
2) Items 2, 4 and 5 need to be provided by the user.
3) On the tank, the high-level alarm ultrasonic probe is recommended to be installed near the spiral ladder for easy installation and maintenance. The ultrasonic probe signal line is inserted into the galvanized pipe and then connected to the controller along the spiral ladder.
4) Explosion-proof flexible pipes are respectively connected to the cable entry of the controller. After installation, the controller shall be higher than the horizontal galvanized pipes on its both sides.
5) The connection specifications of the explosion-proof flexible pipe and the galvanized pipe shall be consistent with the actual selection requirements (cable entry is reserved on the instrument), and the joints between the pipe fitting and the instrument must be done treatment of waterproof and explosion-proof.
6) The meter body must be well grounded.

Wiring diagram of Level controller ( one alarm point, 4-wire system )

Wiring diagram of Level controller (with convertor )

Wiring diagram of Level controller ( 2 alarm points)

Wiring diagram of Level controller ( for SYCW102-LC2 )

Kasus aplikasi