HLS-W311 Medidor ultrasónico de agua ( a pilas )

HLS-W311 Ultrasonic water meters are widely used in the industry of urban water supply, water resource management, agricultural irrigation, garden management.

Descripción del producto

Features

● Ultra-low power consumption, stable property
● Range ratio: R 200 ,   Size: DN15 ~ DN40
● Built-in lithium battery, applicable for the situation that power supply  is not available.
● External power supply of 8- 36 V DC can be connected to support analog current output or communication.
● Weatherproof: IP68, after using glue sealing the wiring joints, the flow meter can be immersed in the water for long term to work, but the immersive depth shall not exceed 2 m.
● Capacitive sensing operation button ( not open the transmitter cover to operate buttons)

 

Mostrar

 

hls w31 display

Datos técnicos
Executive standard ISO 4064-2005, GB/T 778-2007, JJG 162-2009
Fluido Water, waste water, sea water (meter tube must be fully filled with fluid)
Temperatura de funcionamiento 0.1 ~ 30℃ (for cold water),   0.1 ~ 100 ℃ ( for hot water)
Presión de funcionamiento 1.0 Mpa, 1.6 Mpa
Condiciones ambientales Temperature: -10 ~ 45℃;  Humidity: ≤100% RH
Sensitivity level of upstream flow field U3
Sensitivity level of downstream flow field D0
Electromagnetic compatibility level E2
Meter tube Material Brass
Señal de salida One-way 4-20mA, Two-way OCT or TTL (optional),
Comunicación RS485 (optional)
Weather-proof IP68, after using glue sealing the wiring joints, the flow meter can be immersed in the water for long term to work, but the immersive depth shall not exceed 2 m.
Local display Double line, one line (4-digits) display instant flow rate, another line(9 digits) display accumulative flow.
Memory EEPROM / FLASH storage
Measuring cycle 1 time / second
Alimentación Built-in 3.6V 19AH Lithium battery (Standard configuration)
External power supply DC 8 – 36 V (for 4-20mA output or communication)
Power dissipation In case of no output, the Built-in Lithium battery can support flow meter continuously working for about 6 years.

 

Flow rate range
Talla Range ratio
(R)
Flow rate ( m3/h )
Startup flow Minimum flow (Q1) Transitional flow (Q2) Permanent flow (Q3) Overload Flow (Q4)

DN15

200 0.003 0.0125 0.020 2.500 3.125

DN20

200 0.0035 0.016 0.026 3.200 4.000

DN25

200 0.007 0.020 0.032 4.000

5.000

DN32 200 0.010 0.032 0.050 6.300

7.875

DN40 200 0.015 0.100 0.160 20.000

25.000

 

Error curve

hls w31 error

 

Dimension ( Unit: mm

hls w311 dimension

Talla Appearance dimension Thread connection Effective
Thread
length
Pressure
Rating
(Mpa)
L H1 H2 W1 W2

DN15

165 14 129.5 58.5 64.5 G 3/4B 12 1.6

DN20

190 17.5 131.5 58.5 64.5 G 1B 13 1.6

DN25

160 22 134 58.5 64.5 G 1-1/4B 13

1.6

DN32 180 25 136.5 58.5 64.5 G 1-1/2B 14.5

1.6

DN40 200 33 141 58.5 64.5 G 2B 16

1.6

 

 

PREGUNTAS FRECUENTES

Answer : Envíe su pregunta o consulta a nuestro correo electrónico: sales@hginstrument.com, remitiremos las preguntas al ingeniero correspondiente.

Answer : Por favor comuníquese con el departamento de ventas sobre el procedimiento de devolución antes de devolver el producto.

Answer : El plazo de entrega depende de la cantidad del pedido y de la especificación del producto. Si la especificación del producto es convencional ( no especial ),  El plazo de entrega es de 5 ó 7 días laborables para cantidad del pedido ≤ 10 piezas;  El plazo de entrega es de 2 ó 3 semanas laborables para cantidad del pedido 15 ~ 30 piezas. 

Answer por correo, por mar o por aire

Answer : Sí, generalmente la garantía es de un año.

Answer : De 2015 a 2021, el promedio de ventas anuales es de 350 millones de RMB (unos 54,7 millones de USD).