Moving towards the global market for débitmètre massique thermiques, please do not overlook these details!
Due to the fact that the thermal conductivity of the measuring tube is based on the average velocity of temperature and flow, the accuracy will be improved by two poles. This curve represents the overall structure of the thermal flow meter.
Due to the different properties of the two different media, it is necessary to distinguish between radar level meters and radar level meters, and choose which medium to measure. Radar level gauge is a level measuring instrument developed and manufactured by radar level gauge manufacturers, which is a high-precision intelligent measuring instrument. Applied research on the phenomenon of high-frequency radar level meters and developed sensors.
Thermal gas mass flow meter is an instrument that uses the principle of heat conduction to measure fluid flow rate. It can directly measure the mass and density of the fluid without directly measuring the mass flow rate of the fluid. It has much higher characteristics than a level gauge,
Most of the other media electromechanical Level sensor, like LG hydraulic capacitors, are dry and durable.
The rod body of the contact Level sensor should be swung, and the vessel should be calm to make a large change in the level of the vessel. Attention should be paid to the lead lead alloy of the rod, and it should be fixed on a vessel to allow water to flow, so as to assist the professional in transferring this operating mechanism to the mechanism.
Performance: Equivalent to detecting the difference in air flow rate, the difference is measured using a fine tuned square root interval and advanced microprocessor control.
● It can fully meet the range of boiler number and pass external verification (standard scale table).
Equipped with large and small valve controls, which respectively control large flow and small flow (differential pressure), to help prevent the flow meter from being blocked and damaged (such as electromagnetic pumps or electric valves), Prevent the upstream valve from fully closing.
A circuit composed of a differential pressure gauge and a differential pressure expression (flat adjustment with low shear loss), making the differential pressure slightly weaker than the flow meter.
The selection of flow meters can be divided into two types, namely 0, 1, 2, 3, and parallel operation. Connect and excite the coil (WTLLC) according to the output signal, and then measure various forms and line currents with the Ammeter as the unit name, and output 4~20mA for AC and DC power supply. Voltmeter with resistance output. The meter has positive and negative 24VDC power supply positive and negative 24VDC output wiring lines. The voltage range of resistance output can be up to U type. 2. LCD/LED displays the measured instantaneous flow rate and cumulative flow rate, with zero scale display. For the convenience of instantaneous flow measurement, the output signal can be connected to other devices (such as magnetic regulators, Hall angle sensors, rotating full cubic/minute cylinders). For locations that are difficult to access or detect, an output signal interface can be set. To ensure sufficient sensitivity, please replace the detection cuff, electrode, shell input module, remote transmission module, etc. When the vapor can be measured, the detection sleeve, battery box cover, or LCD screen device can be fastened in front of the meter, and it is strictly prohibited to flow in from the signal line.