Pengukur Aliran Ultrasonik yang Dipasang di Dinding HGLS-2000B dengan sensor penjepit
Pengukur Aliran Ultrasonik yang Dipasang di Dinding HGLS-2000B
HGLS-2000B Wall Mounted Ultrasonic Flow Meter display flow rate
Ultrasonic clamp-on flow sensor
Ultrasonic clamp-on flow sensor's wiring box

Pengukur Aliran Ultrasonik yang Dipasang di Dinding HGLS-2000B

HGLS-2000B wall-mount ultrasonic flow meter is designed to be installed in a fixed location for long-term flow measuring.  Features as follow:
● Principle: transit-time measuring, Weather proof: IP67
● Measurable flow velocity: 0.03 – 7m/s, Accuracy: better than 1% for flow
● LCD screen, display total flow / heat, instant flow / heat, velocity, time etc.
● Output option: 4-20mA / OCT pulse,RS485, Modbus protocol (standard config.), Relay alarm (optional)
● Pt100 resistor input (optional, for heat measuring)
● Power supply option: 24VDC, 220VAC
● Signal Cable length: 5m * 2 (standard config.), or customize cable length
● Guide rail mounting ( Optional )

 

sales@hginstrument.com

Deskripsi Produk

Technical Specifications
Item description
Main unit Akurasi Better than ± 1%
Pengulangan Better than 0.2%
Prinsip Transit-time measuring principle
Measurement period 500ms
Tampilan LCD with backlight , display accumulated flow/heat, instantaneous
Flow / heat, velocity, time etc.
Keluaran Analogue output: 4-20mA or 0-20mA current output. Impedance 0 -1k Ω. Accuracy 0.1%.
OCT output: Frequency signal (1~9999HZ)
Relay output: over 20 source signal (no signal, reverse flow etc.)
RS485 serial port
Input Three analogue input
Three-wire PT100 resistor input (optional)
Other functions Automatically record t he totalizer data of the last 64 days / 64 months /5 years. The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation. The instrument working status of the last 64 days.
Pipe Bahan Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
Ukuran DN 32 -6000mm
Straight pipe
section		 Upstream ≥10D, Downstream ≥ 5D, distance from the pump discharge ≥ 30D. (D stands for pipe diameter)
Fluid
(must fully fill the pipeline )		 Jenis Liquid, no strong corrosivity, Common used fluid: Water, sea water, sewage, alcohol, beer.
Suhu Standard: -30 ˚ C – 90 ˚ C ， High-temperature ： -30 ˚ C – 160 ˚ C
Flow velocity measurable range 0 .03 ~ 7 m/s
Turbidity Content of particulate impurity and bubbles shall be less than 10000ppm.
Flow Direction Bi-directional measuring, net flow/heat measuring
Environment Suhu Main Unit: -30 ˚ C – 80 ˚ C
Transducer: -40 ℃-160 ℃, Temperature transducer: select on enquiry
Kelembaban Main Unit: 85% RH
Transducer: water-immersible, water depth less than 3m
Cable Twisted Pair Line, standard length of 10m, can be extended to 500m (but such length is not recommended); contact the manufacturer for longer cable if requirement.
RS-485 interface, transmission distance up to 1000m
Catu Daya AC220V or DC24V
Power consumption Less than 1.5W
Protocols MODBUS, M-BUS, Fuji extended protocol and other factory protocol
Optional configuration SD card, capacity 2G, storage time depends on storage interval setting.

 

Application diagram
Jenis sensor Flow measure Flow measure and Heat measure Fitur
Clamp-on
Jenis		 ad 1 ad 2

1>. Not need stop process when installation
2>. Easy installation and maintenance
3>. Can be equipped with clamp type temperature sensor to measure heat
Insertion
Jenis		 ad 3 ad 4 1>. Not need stop process when installation
2>. Stable and reliable
3>. Can be equipped with insertion type temperature sensor to measure heat
On-line type ad 5 ad 6

1>. Not need stop process when installation
2>. High accuracy
3>. Can be equipped with insertion type temperature sensor to measure heat

 

Optional Flow Sensor
Sensor appearance code Deskripsi Suhu Akurasi
s1 TS-2 Small size clamp-on type
(Magnetic)
for DN15～DN100mm		 -30℃～90℃ ±1%FS
s1 TM-1 Middle size clamp-on type
(Magnetic)
for DN50～DN700mm		 -30℃～90℃ ±1%FS
s1 TL-1 Large size clamp-on type
(Magnetic)
for DN300～DN6000mm		 -30℃～90℃ ±1%FS
s2 TS-2-HT Small size High-temperature
clamp-on type
for DN15～DN100mm		 -30℃～160℃ ±1%FS
s2 TM-1-HT Middle size High-temperature
clamp-on type
for DN50～DN700mm		 -30℃～160℃ ±1%FS
s2 TL-1-HT Large size High-temperature
clamp-on type
for DN300～DN6000mm		 -30℃～160℃ ±1%FS
s3 TC-1 Standard Insertion type
For pipeline wall thickness ≤20 mm		 -30℃～160℃ ±2~ 3%FS
s4 TC-2 Extended Insertion type
For pipeline wall thickness ≤70 mm		 -30℃～160℃ ±2~ 3%FS
s5 TC-3 Parallel Insertion type
No requirement to the pipeline wall thickness, be suitable “V” method mounting		 -30℃～160℃ ±3~ 5%FS
s6 G3 ‘π’ shape tube transducer
for DN15～DN32mm		 -30℃～160℃ ±0.5%FS
s7 G1 Standard tube transducer
for DN40～DN6000mm		 -30℃～160℃ ±0.5%FS

 

Feild Installation

feild installation 1

 

 

Produk terkait

PERTANYAAN YANG SERING DIAJUKAN

Answer : Silakan kirimkan pertanyaan atau pertanyaan Anda ke email kami: sales@hginstrument.com, kami akan meneruskan pertanyaan tersebut ke teknisi terkait.

Answer : Tolong berkomunikasi dengan bagian penjualan tentang prosedur pengembalian sebelum mengembalikan produk.

Answer : Waktu pengiriman tergantung pada jumlah pesanan dan spesifikasi produk. Jika spesifikasi produk adalah konvensional (tidak istimewa),  waktu pengiriman adalah 5 atau 7 hari kerja untuk jumlah pesanan ≤ 10 buah;  waktu pengiriman adalah 2 atau 3 minggu kerja untuk jumlah pesanan 15 ~ 30 potongan. 

Answer melalui Kurir, Laut atau Udara

Answer : Ya, Umumnya garansi satu tahun.

Answer : Dari tahun 2015 hingga tahun 2021, penjualan tahunan rata-rata adalah RMB 350 juta (sekitar USD 54,7 juta)