Caudalímetro ultrasónico de pared HGLS-2000B

HGLS-2000B wall-mount ultrasonic flow meter is designed to be installed in a fixed location for long-term flow measuring.  Features as follow:
● Principle: transit-time measuring, Weather proof: IP67
● Measurable flow velocity: 0.03 – 7m/s, Accuracy: better than 1% for flow
● LCD screen, display total flow / heat, instant flow / heat, velocity, time etc.
● Output option: 4-20mA / OCT pulse,RS485, Modbus protocol (standard config.), Relay alarm (optional)
● Pt100 resistor input (optional, for heat measuring)
● Power supply option: 24VDC, 220VAC
● Signal Cable length: 5m * 2 (standard config.), or customize cable length
● Guide rail mounting ( Optional )

 

Descripción del producto

Technical Specifications
Artículodescription
Main unitPrecisiónBetter than ± 1%
RepeatabilityBetter than 0.2%
PrincipioTransit-time measuring principle
Measurement period500ms
MostrarLCD with backlight , display accumulated flow/heat, instantaneous
Flow / heat, velocity, time etc.
SalidaAnalogue output: 4-20mA or 0-20mA current output. Impedance 0 -1k Ω. Accuracy 0.1%.
OCT output: Frequency signal (1~9999HZ)
Relay output: over 20 source signal (no signal, reverse flow etc.)
RS485 serial port
InputThree analogue input
Three-wire PT100 resistor input (optional)
Other functionsAutomatically record t he totalizer data of the last 64 days / 64 months /5 years. The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation. The instrument working status of the last 64 days.
PipeMaterialSteel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
TallaDN 32 -6000mm
Straight pipe
section
Upstream ≥10D, Downstream ≥ 5D, distance from the pump discharge ≥ 30D. (D stands for pipe diameter)
Fluido
(must fully fill the pipeline )
TipoLiquid, no strong corrosivity, Common used fluid: Water, sea water, sewage, alcohol, beer.
TemperaturaStandard: -30 ˚ C – 90 ˚ C , High-temperature : -30 ˚ C – 160 ˚ C
Flow velocity measurable range0 .03 ~ 7 m/s
TurbidityContent of particulate impurity and bubbles shall be less than 10000ppm.
Flow DirectionBi-directional measuring, net flow/heat measuring
EnvironmentTemperaturaMain Unit: -30 ˚ C – 80 ˚ C
Transducer: -40 ℃-160 ℃, Temperature transducer: select on enquiry
HumedadMain Unit: 85% RH
Transducer: water-immersible, water depth less than 3m
CableTwisted Pair Line, standard length of 10m, can be extended to 500m (but such length is not recommended); contact the manufacturer for longer cable if requirement.
RS-485 interface, transmission distance up to 1000m
Power SupplyAC220V or DC24V
Power consumptionLess than 1.5W
ProtocolsMODBUS, M-BUS, Fuji extended protocol and other factory protocol
Optional configurationSD card, capacity 2G, storage time depends on storage interval setting.

 

Application diagram
Sensor typeFlow measureFlow measure and Heat measureFeatures
Clamp-on
type
ad 1ad 2

1>. Not need stop process when installation
2>. Easy installation and maintenance
3>. Can be equipped with clamp type temperature sensor to measure heat

Insertion
type
ad 3ad 41>. Not need stop process when installation
2>. Stable and reliable
3>. Can be equipped with insertion type temperature sensor to measure heat
On-line typead 5ad 6

1>. Not need stop process when installation
2>. High accuracy
3>. Can be equipped with insertion type temperature sensor to measure heat

 

Optional Flow Sensor
Sensor appearancecódigoDescripciónTemperaturaPrecisión
s1TS-2Small size clamp-on type
(Magnetic)
for DN15~DN100mm
-30℃~90℃±1%FS
s1TM-1Middle size clamp-on type
(Magnetic)
for DN50~DN700mm
-30℃~90℃±1%FS
s1TL-1Large size clamp-on type
(Magnetic)
for DN300~DN6000mm
-30℃~90℃±1%FS
s2TS-2-HTSmall size High-temperature
clamp-on type
for DN15~DN100mm
-30℃~160℃±1%FS
s2TM-1-HTMiddle size High-temperature
clamp-on type
for DN50~DN700mm
-30℃~160℃±1%FS
s2TL-1-HTLarge size High-temperature
clamp-on type
for DN300~DN6000mm
-30℃~160℃±1%FS
s3TC-1Standard Insertion type
For pipeline wall thickness ≤20 mm
-30℃~160℃±2~ 3%FS
s4TC-2Extended Insertion type
For pipeline wall thickness ≤70 mm
-30℃~160℃±2~ 3%FS
s5TC-3Parallel Insertion type
No requirement to the pipeline wall thickness, be suitable “V” method mounting
-30℃~160℃±3~ 5%FS
s6G3‘π’ shape tube transducer
for DN15~DN32mm
-30℃~160℃±0.5%FS
s7G1Standard tube transducer
for DN40~DN6000mm
-30℃~160℃±0.5%FS

 

Feild Installation

feild installation 1

 

 

PREGUNTAS FRECUENTES

Answer : Envíe su pregunta o consulta a nuestro correo electrónico: sales@hginstrument.com, remitiremos las preguntas al ingeniero correspondiente.

Answer : Por favor comuníquese con el departamento de ventas sobre el procedimiento de devolución antes de devolver el producto.

Answer : El plazo de entrega depende de la cantidad del pedido y de la especificación del producto. Si la especificación del producto es convencional ( no especial ),  El plazo de entrega es de 5 ó 7 días laborables para cantidad del pedido ≤ 10 piezas;  El plazo de entrega es de 2 ó 3 semanas laborables para cantidad del pedido 15 ~ 30 piezas. 

Answer por correo, por mar o por aire

Answer : Sí, generalmente la garantía es de un año.

Answer : De 2015 a 2021, el promedio de ventas anuales es de 350 millones de RMB (unos 54,7 millones de USD).