HGLS-2000B Misuratore di portata a ultrasuoni a parete con sensore a morsetto
Misuratore di portata a ultrasuoni a parete HGLS-2000B
HGLS-2000B Wall Mounted Ultrasonic Flow Meter display flow rate
Ultrasonic clamp-on flow sensor
Ultrasonic clamp-on flow sensor's wiring box

Misuratore di portata a ultrasuoni a parete HGLS-2000B

HGLS-2000B wall-mount ultrasonic flow meter is designed to be installed in a fixed location for long-term flow measuring.  Features as follow:
● Principle: transit-time measuring, Weather proof: IP67
● Measurable flow velocity: 0.03 – 7m/s, Accuracy: better than 1% for flow
● LCD screen, display total flow / heat, instant flow / heat, velocity, time etc.
● Output option: 4-20mA / OCT pulse,RS485, Modbus protocol (standard config.), Relay alarm (optional)
● Pt100 resistor input (optional, for heat measuring)
● Power supply option: 24VDC, 220VAC
● Signal Cable length: 5m * 2 (standard config.), or customize cable length
● Guide rail mounting ( Optional )

 

sales@hginstrument.com

Descrizione del prodotto

Technical Specifications
Articolo description
Main unit Precisione Better than ± 1%
Ripetibilità Better than 0.2%
Principio Transit-time measuring principle
Measurement period 500ms
Display LCD with backlight , display accumulated flow/heat, instantaneous
Flow / heat, velocity, time etc.
Uscita Analogue output: 4-20mA or 0-20mA current output. Impedance 0 -1k Ω. Accuracy 0.1%.
OCT output: Frequency signal (1~9999HZ)
Relay output: over 20 source signal (no signal, reverse flow etc.)
RS485 serial port
Ingresso Three analogue input
Three-wire PT100 resistor input (optional)
Other functions Automatically record t he totalizer data of the last 64 days / 64 months /5 years. The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation. The instrument working status of the last 64 days.
Pipe Material Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
Dimensione DN 32 -6000mm
Tubo dritto
section		 Upstream ≥10D, Downstream ≥ 5D, distance from the pump discharge ≥ 30D. (D stands for pipe diameter)
Fluido
(must fully fill the pipeline )		 Tipo Liquid, no strong corrosivity, Common used fluid: Water, sea water, sewage, alcohol, beer.
Temperatura Standard: -30 ˚ C – 90 ˚ C ， High-temperature ： -30 ˚ C – 160 ˚ C
Flow velocity measurable range 0 .03 ~ 7 m/s
Torbidità Content of particulate impurity and bubbles shall be less than 10000ppm.
Flow Direction Bi-directional measuring, net flow/heat measuring
Ambiente Temperatura Main Unit: -30 ˚ C – 80 ˚ C
Transducer: -40 ℃-160 ℃, Temperature transducer: select on enquiry
Umidità Main Unit: 85% RH
Transducer: water-immersible, water depth less than 3m
Cable Twisted Pair Line, standard length of 10m, can be extended to 500m (but such length is not recommended); contact the manufacturer for longer cable if requirement.
RS-485 interface, transmission distance up to 1000m
Alimentazione AC220V or DC24V
Power consumption Less than 1.5W
Protocols MODBUS, M-BUS, Fuji extended protocol and other factory protocol
Optional configuration SD card, capacity 2G, storage time depends on storage interval setting.

 

Application diagram
Tipo di sensore Flow measure Flow measure and Heat measure Features
Clamp-on
tipo		 ad 1 ad 2

1>. Not need stop process when installation
2>. Easy installation and maintenance
3>. Can be equipped with clamp type temperature sensor to measure heat
Insertion
tipo		 ad 3 ad 4 1>. Not need stop process when installation
2>. Stable and reliable
3>. Can be equipped with insertion type temperature sensor to measure heat
On-line type ad 5 ad 6

1>. Not need stop process when installation
2>. High accuracy
3>. Can be equipped with insertion type temperature sensor to measure heat

 

Optional Flow Sensor
Sensor appearance code Descrizione Temperatura Precisione
s1 TS-2 Small size clamp-on type
(Magnetic)
for DN15～DN100mm		 -30℃～90℃ ±1%FS
s1 TM-1 Middle size clamp-on type
(Magnetic)
for DN50～DN700mm		 -30℃～90℃ ±1%FS
s1 TL-1 Large size clamp-on type
(Magnetic)
for DN300～DN6000mm		 -30℃～90℃ ±1%FS
s2 TS-2-HT Small size High-temperature
clamp-on type
for DN15～DN100mm		 -30℃～160℃ ±1%FS
s2 TM-1-HT Middle size High-temperature
clamp-on type
for DN50～DN700mm		 -30℃～160℃ ±1%FS
s2 TL-1-HT Large size High-temperature
clamp-on type
for DN300～DN6000mm		 -30℃～160℃ ±1%FS
s3 TC-1 Standard Insertion type
For pipeline wall thickness ≤20 mm		 -30℃～160℃ ±2~ 3%FS
s4 TC-2 Extended Insertion type
For pipeline wall thickness ≤70 mm		 -30℃～160℃ ±2~ 3%FS
s5 TC-3 Parallel Insertion type
No requirement to the pipeline wall thickness, be suitable “V” method mounting		 -30℃～160℃ ±3~ 5%FS
s6 G3 ‘π’ shape tube transducer
for DN15～DN32mm		 -30℃～160℃ ±0.5%FS
s7 G1 Standard tube transducer
for DN40～DN6000mm		 -30℃～160℃ ±0.5%FS

 

Feild Installation

feild installation 1

 

 

Prodotti correlati

FAQ

Arisposta : Inviate la vostra domanda o richiesta al nostro indirizzo e-mail: sales@hginstrument.com, inoltreremo le domande all'ingegnere di riferimento.

Arisposta : Per favore comunicare con le vendite la procedura di restituzione prima di restituire il prodotto.

Arisposta : I tempi di consegna dipendono dalla quantità ordinata e dalle specifiche del prodotto. Se le specifiche del prodotto sono convenzionale (non speciale),  I tempi di consegna sono di 5 o 7 giorni lavorativi per quantità d'ordine ≤ 10 pezzi;  I tempi di consegna sono di 2 o 3 settimane lavorative per quantità d'ordine 15 ~ 30 pezzi. 

Arisposta Per corriere, via mare o per via aerea

Arisposta : Sì, in genere la garanzia è di un anno.

Arisposta : Dal 2015 al 2021, il fatturato medio annuo è di 350 milioni di RMB (circa 54,7 milioni di USD).