Medidor de caudal ultrassónico de canal aberto HGUOC

Advantage：

• Non-contact measuring, sensor does not contact the measured medium, without hazard of abrasion and corrosion, long span and easy to maintain
• High accuracy, liquid level change 1mm, the volume flow will also change correspondingly
• Suitable for many weir/flume, support international and ISO version of weir/groove, such as Parshall flume, triangular weir (30°, 45°, 60°, 90°, 120°), rectangular weir(can customize weir’s width),can input formula of calculating volume flow.
• LCD display with backlight, operation language option: Chinese / English
• Can set flow unit, correct accumulated flow and set many menu item
• Simple to programming, easy to operate
• Sensor weather proof grade: IP68
• Sensor has strong anti-interference performance, low blind area, high sensitivity, the length of cable connecting sensor to main unit can reach to 1000m
• Can supply 6 relay outputs, pulse output of accumulated flow
• Can supply RS485 communication base on Modbus-RTU protocol
• Can supply corresponding manipulator for operate expediently
• Can customize solar power supply mode, wireless transmission(database server is in China)

Principle：

Ultra sensor is installed on the top of weir/flume( shown as diagram above), sensor emit a bunch of sound wave to liquid surface periodically, when this bunch of wave reach to liquid surface, it will be reflected back and received by sensor, main unit will measure the transmission time (t) of this process. The known sound wave velocity is “V”.    d=V*t/2,   h=H-d

For the known weir/flume, there is a certain function relationship between the volume flow and the corresponding liquid level value. That is Q= f (h). In main unit, you can set parameter value of weir/flume according to the known weir/flume, the main unit will calculate volume flow automatically during measuring process. Ultrasonic open channel flow meter firstly measures the distance from sensor to the liquid surface, then calculate the liquid level value, then calculate the volume flow. It is important for Installation and commissioning to know this flow meter’s working principle.

Main unit technical data:

	Main unit parameter description
Weir/flume type	ISO type: Parshall flume (No.1 to 23), rectangular weir(25/50/75/100cm or customize weir width), triangular weir(30°, 45°, 60°, 90°, 120°), customized weir/flume China National type: Parshall flume (No.1 to 25), rectangular weir (25/50/75/100cm or customize weir width), Right-angled triangle weir, customized weir/flume.
Level resolution	1 mm
Level error	1mm or 0.2%FS @ stable condition
Ecrã	LCD display with graph and backlight
Op. Language	Chinese / English (can be selected)
Parameter setting	Keys operation ( manipulator is option)
Instant flow display range	0.000 – 999999L/S or m3/h, m3/min (automatically conversion base on selected flow unit)
Total flow display Max. value	99999999.9 m3/h
Analog output	4-20mA (corresponding to instant flow)
Load resistance	0-500Ω
Comunicação	RS485 interface, Modbus-RTU protocol
Saída de relé	Upper limit/lower limit alarm (to control instant flow or liquid level) Pulse output (for accumulated flow, pulse equivalent can be selected)
Relay switch mode	Normal open / Normal close (can select)
Relay Number	6 pcs at most
Relay specification	5A 250VAC / 30VDC
Alimentação eléctrica	24VDC (±5%)  0.2A;    220VAC(±20%)  0.1A
Ciclo de medição	1 second as default (can set)
Temp. ambiente	-40 to 75℃
Material da caixa	ABS
À prova de intempéries	IP67
Cable gland	PG9 / PG11 / PG13.5
Montagem	Wall mounted
Tamanho	250*185*125 mm

Sensor technical data:

	Sensor parameter description
Level Range	0.00 ～ 4.00 m, 6.00m, 8.00m, 12.00m, 20.00m, 30.00m, 40.00m
Blind area	0.20m
Operation Temp.	-40 to 70℃
À prova de intempéries	IP68
Shell material	Option: ABS / PVC / PTFE
Pressão nominal	0.2 Mpa
Comprimento do cabo	Standard configure: 10m, (can extend to 1000m)
Beam angle	8°(3db)
Montagem	Thread, Flanged, Bracket

Esquema de instalação: