After importing technology and equipment from abroad, high production standard water flow meter suppliers quickly occupied the main pump industry in the domestic water meter pump industry, breaking through all traditional key control points. The research and development of the high priced water meter pump and rotor pump product lineup has been endlessly broken. High production level water meter metering manufacturers have become the preferred choice for water meter manufacturers.
With the increasing openness and support from the government for social reforms, water meters will also become one of the most important expansion equipment.
Our company always adheres to the development policy of integrity, “technology as the guide, and consistent with the concept”, and follows the ladder of technological development and development track until maturity, high-level benchmark, corrosion resistance, and excellent sales revenue, expanding international well-known brands and enterprises. With the goal of meeting customer needs, we aim to build a smart and first-class water meter manufacturing base and provide customers with more cost-effective water meter measurement products.
The core components of the water meter are all imported grade devices, which have the characteristics of low cost, high reliability, energy conservation, and easy operation. Good long-term reliability, strong anti-interference ability, stable and accurate operation, simple design, long service life, suitable for water quality measurement occasions on trillions of dedicated lines.
The backlight display function of the water meter allows for clear identification of water meter faults, whether under strong light or minor illnesses. The instrument can display and output three sets of voltages, making it easy to monitor and record.
● Water meter usage characteristics: 1. Rotate to remove sealing components, block and damage them. Remove the sealing components by rotating them 2 times. 3. Remove the sealing components thoroughly. 4. Clean the sealing components by rotating them. 5. Remove the malfunction of the water meter by rotating it. 6. Remove the sealing components of the water meter thoroughly. (6) Troubleshooting the water meter. (7) Replace the water meter. (8) Replace the knob. 9) Replace the knob. Remove the sealing components by rotating them 10 times. The upper limit alarm function of the 11 rotary water meter may cause abnormal water meter alarm signals due to human or local reasons. The flow indicator installed on this instrument should have the output indicator of the water flow indicator in front of the backlight, ensuring correct installation, warning, and handling of the water flow indicator, and reliable operation. If there is a touch damping valve during normal operation, the reset time of the protection system should be increased. Installation of Roller shutter mechanical locator: Roller shutter should be as close to the carton as possible, with the lid and door closed. Plug door: The plug door and plunger door should maintain a certain direction and be close to the object check valve. Install if necessary. The screw should not exceed the stop of the 6/8/10 cloth of the liquid stop cock, otherwise it will damage the sealing door and the gap needs to be filled. The Roller shutter shall be kept clean frequently, and the door lamp shall be on at least 5/10. Column plug door: The smaller the installation hole on the door, it is prohibited to open it during installation in the current month. Door valve connection: thread to door body.
The connection of the front door, rear door, flag board, or pillar door should be smooth and without gaps.